15-minute vinyl siding repair with a zip tool
Photo 1: A zip tool is the keySlide the zip tool along the bottom edge to release the vinyl siding from the piece below it. This vinyl siding repair tip will save you loads of time.
How Do You Replace Vinyl Siding?Vinyl siding repair is tough, but not indestructible. If a falling branch or a well-hit baseball has cracked a piece of your siding, you can make it as good as new in about 15 minutes with a zip tool and a replacement piece. It’s as simple as unzipping the damaged piece and snapping in a new one. Get this vinyl siding repair kit zip tool on Amazon.Starting at one end of the damaged piece, push the end of the zip siding removal tool up under the siding until you feel it hook the bottom lip (Photo 1). Pull the zip tool downward and out to unhook the bottom lip, then slide it along the edge, pulling the siding out as you go. Then unzip any pieces above the damaged piece. Hold them out of the way with your elbow while you pry out the nails that hold the damaged piece in place (Photo 2).Slide the replacement piece up into place, pushing up until the lower lip locks into the piece below it. Drive 1-1/4-in. roofing nails through the nailing flange. Space them about every 16 in. (near the old nail holes). Nail in the center of the nailing slot and leave about 1/32 in. of space between the nail head and the siding so the vinyl can move freely. Don’t nail the heads tightly or the siding will buckle when it warms up.With the new piece nailed, use the zip tool to lock the upper piece down over it. Start at one end and pull the lip down, twisting the siding removal tool slightly to force the leading edge down (Photo 3). Slide the zip tool along, pushing in on the vinyl just behind the siding removal tool with your other hand so it snaps into place.It’s best to repair vinyl in warm weather. In temperatures below freezing, it becomes less flexible and may crack.The downside of replacing older vinyl siding is that it can be hard to match the style and color, and siding rarely has any identifying marks. The best way to get a replacement piece is to take the broken piece to vinyl siding distributors in your area and find the closest match. If the old vinyl has faded or you can’t find the right color, take the broken piece to a paint store and have the color matched. Paint the replacement piece with one coat of top-quality acrylic primer followed by acrylic house paint—acrylic paint will flex with the movement of the vinyl.
Required Tools for this How to Remove Vinyl Siding ProjectHave the necessary tools for this DIY how to remove vinyl siding project lined up before you start—you’ll save time and frustration.
- Pry bar
Required Materials for this How to Remove Vinyl Siding ProjectAvoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- Zip tool
Cut parallel lines
Connect the two cuts
Raise the vent up to the soffit
Attach the vent to the soffit
Remove any insulation from the new vent
Install the ventilation baffle
Finally, to ensure that the airway to the vent remains open, staple a ventilation baffle to the plywood sheathing in each rafter bay. The molded polystyrene baffles, available at home centers and lumberyards for about $1 each, form channels that hold insulation at bay and direct incoming air upward.
Paint for Neutral AmbianceNeutral colors are the most appealing choice for home buyers. Painting is a big job, and something that many buyers don’t want to tackle right away. Bold colors are entirely a matter of personal preference. You may love that deep teal on the walls, but it will be more difficult to connect with prospective buyers when you’ve chosen such a distinctive hue. Instead, paint your home in shades that are easy to match, such as eggshell, tan, white or pewter.
Upgrade for Energy Efficiency
Smart homebuyers look at more than the up-front cost of the home. They’ll also consider ongoing expenses such as utilities and upkeep. That’s why Energy Star appliances and newer HVAC systems are so appealing. If you don’t have the funds for these major investments, you can improve your home’s energy efficiency on a budget by sealing and insulating. Address cracks or gaps around windows and doors. Replace the seals around doors and windows, repair any damage to the siding, and check your insulation.“Sealing your home everywhere you can makes a big difference, not only in your energy bills, but in the comfort of the home,” said Julie Jacobson, a Redfin real estate agent in California. “Inexpensive weatherstripping available at your local hardware store will do the trick. Your local utility company or county may even offer rebates and incentives for making these upgrades.”
Clean Up for Spacious Impressions
Cluttered homes look smaller and hectic. Clear the odds and ends, and make your home look as much like a showroom as possible. If the idea of organizing all these items is too overwhelming, simply box them up and stash them in unseen areas, such as under the bed. You may even want to rent a small storage space while you’re staging your home so that you can clear out your closets and show off their spacious nature or empty the garage and make it look more appealing.
Landscape Carefully for Curb Appeal
First impressions are critical when you’re selling your home. Many prospective buyers will do a drive-by before scheduling a viewing. If they don’t like what they see from the street, they’ll never step inside the home. Keep your yard well maintained with manicured bushes, carefully tended flower beds, and a clutter-free lawn. Small improvements such as painting the front door, straightening the mailbox, and replacing that missing stone in the walkway will go a long way toward enticing a buyer.
Polish Up the Bathroom for a Like-New Look
You don’t have to remodel your whole bathroom for the same level of appeal. At a minimum, you should recaulk the tub for a fresh, clean look. If you can’t eliminate stains and discoloration completely, reglaze the tub to make it look like new. Keep this room meticulously clean, regularly sweeping up stray hairs, dusting light fixtures, and cleaning the mirror so that it looks pristine.
A well-staged home will draw more buyers and entice the type of bidding war every seller wants. Make the effort to present your home well, and you’ll reap major rewards for your efforts.
Adding a DIY fire pit to your backyard is an excellent way to keep the fun going long after dark.
Instead of an unsightly dirt fire pit, spend a day making a new statement piece for your yard. If you’re wondering how to build a fire pit — we’ll show you how!
When selecting and building your DIY fire pit, make sure you avoid using wet stones. If you are using river rocks, be sure to give them several days of direct sunlight to properly dry.
1. In-Ground DIY Fire PitThe in-ground fire pit is becoming increasingly popular among DIY fire pit builders. Before digging into the ground, make sure you call 811, the federally mandated “Call Before You Dig Number.” Someone will come to mark the approximate location of any underground lines, pipes, and cables so you can dig safely. Once you dig your fire pit to the desired size, line the dirt walls with stones or brick. Follow these additional steps to get started:
- First, want to create a bottom layer of gravel, then cover it with the “bottom” of your fire pit — larger stones or bricks or an even covering such as quick drying cement.
- Be sure to have drainage or it will turn into a mosquito pond.
- Create your top rim by making small cutouts in the dirt for your bricks or stones.
- Finally, dry stack your desired additional layers, or create a small wall using fire resistant adhesives or quick drying cement.
2. Overlaid Stone DIY Fire PitFor an artistic-looking fire pit, instead of evenly shaped bricks, grab several unique rough rocks, and construct an overlaid stone fire pit. If your pieces are hearty enough (pictured is Pennsylvania Blue Stone) you won’t need any cement for this pit either — but use common sense when building up your walls. Here are some additional tips to secure your structure:
- If the stones do not feel secure, add in some non-flammable masonry adhesive, landscape adhesive or Liquid Nails.
- For the center, line the bottom of your fire pit with one or two inches of sand.
- The outside of your fire pit should be lined as well, and no grass or other yard matter should be within two feet of your pit.
3. Tin DIY Fire PitUsing whatever barrel-shaped scraps you can find, you can create this all-in-one tin fire pit. Tin fire pits are extra safe as they ensure your fire is adequately contained, and are much preferred in areas with wide open plains and active winds such as El Paso.You can spruce up your repurposed tin barrel nicely with some high-heat paint (like Rust-Oleum) and stencils.
4. Gravel DIY Fire PitThere is no digging required for this DIY fire pit design! Select some handsome gravel for your foundation, spread it out to create your overall fire pit space, then stack your fire pit stones. The fire pit pictured was built with crushed concrete rock with some additional aesthetic details.The pit’s stones ought to be more than heavy enough to be dry stacked — no need for adhesive or cement. Hang some outdoor lights above your fire pit to finish off your welcoming ambiance for backyard guests.
5. Raised DIY Fire Pit with Fire BowlIf you want an elevated fire, this is an ideal design for you. You can build up your fire pit walls to the desired height (only use even bricks for this design, not the rough stones mentioned above) and then top off with a fire bowl.Ensure that your fire pit is the proper size for the bowl by building the first layer of the wall around the screen top of your fire bowl. When purchasing a fire bowl, make sure it has holes for drainage in the center (dumping out fire bowls filled with water is a hassle).
6. Grate Drum DIY Fire Pit
For a less formal, down-home fire pit look, simply add a smoker fire basket (sometimes also called a vertical drum) to the mix. You can either buy one pre-made, or you can craft one yourself using flexible metal grating from the hardware store and a few bolts to fasten it into a circle. Quite a few Hometalk DIYers like to use old washing machine drums, which cost about $10 from used appliance stores. Then insert your drum into the center of your fire pit. If you choose to build a solid wall design like the fire pit pictures, make sure you leave a drainage route for rainwater.
Whichever style you choose, just make sure you enjoy responsibly. Hometalk breaks down all the necessary safety precautions before, during, and after building your fire pit in “Stop! Your Must Have Handbook for Building DIY Fire Pits.”
When to change a furnace filterIf you’re thinking that you only have to change your filter once a year, you may well be shortening the life of your furnace. Actually, you should check your filter monthly and often change it monthly, depending on the type of filter you use. To determine if it’s too dirty, remove the filter and hold it up to the light. If you can no longer clearly see light, change the filter (see photo).Many costly repairs can be avoided with regular filter changing. If you don’t change the filter, lack of airflow through the furnace will cause it to overheat and shut down. Similarly, a dirty filter can cause an air conditioner to shut down because the coils freeze up when airflow is inadequate. Both events stress the system.Filters are designed to protect the blower motor from dirt. When buying filters for this task, an inexpensive glass fiber filter will do the job. But if you want to reduce airborne dust in your home, you could start with the best of the inexpensive 1-in. disposable filters—the standard pleated filter—which costs a bit more. Better yet, to remove even more small particles, install an inexpensive, electrostatically charged fiber filter. 3M Filtrete is one common brand.. Just make sure to check the filter monthly and change it when it’s dirty (not just every three months as recommended).All other options, from a 4-in. thick mechanical air filter to an electronic filter plate system, involve electrical or ductwork changes by heating/cooling contractors. They remove more particles, last longer and cost more.Finally, whatever filter you use, make sure you reinstall it correctly, with the arrow on the filter edge pointing toward the blower motor. Putting it in backward decreases the filter’s efficiency.
These tips and tricks for the home have been passed down from generation to generation, but do they still hold up today? You better believe it!
No need to scramble for a ruler every time you have to measure something big. Draw a ruler on your shop floor with a permanent-ink, felt-tip marker. It won’t be accurate enough for precise measurements, but for rough cutting it will save you time and effort. When the markings start to wear off, just redo them. — Christine Smith
Trapeze Clothes Hanger
Here’s a quick way to add another clothes rod in a closet. It’s especially useful in a child’s closet, because you can easily adjust the height to accommodate a changing wardrobe and a growing child. Use lightweight chain, attached to both the upper and lower rods with screw hooks. Squeeze the screw hooks closed with a pliers. — Jim Shephard. Find out these amazing additional ways to find more closet space you can do yourself.
Lawn Fertilizer Markers
So you fertilized your lawn last week, and now you’ve got some streaks of pale grass where you missed, and some really dark streaks where you hit twice. To prevent this, use two short lengths of wood as markers. Whenever you start a new row from either end of your run, drop a marker at the edge of the line of the fertilizer. Aim for the marker as you proceed, and move the marker at each end every time you make a turn. It works with a broadcast spreader as well. — Jim Carabetta. If you want a lusher lawn, then pull up these 11 tips for a lawn that will make your neighbors green with envy.
Help For Losers
Doesn’t it drive you nuts when you drop a small part on the floor and you can’t find it? Here’s help. Lay a flashlight on the floor, and beam the light slowly in a circle so it just skims the floor surface. The shadow cast by the lost part will help you spot it. — Gary StewartThink that’s helpful? Well, you love these 45 hugely helpful handy hints that will keep cash in your pocket.
Vacuum Accessory Keeper
Here’s my quick and simple method for keeping shop vacuum accessories handy: Use an ordinary wire clothes hanger for each accessory. Bend the horizontal bar into an inverted “V,” squeeze the arms together and insert them into the open end of the accessory. The tension will hold the accessory in place. Then mount a row of hooks or screw eyes on the wall and hang the accessories in place. — Richard SiegelStoring vacuum accessories and other tough-to-store items can be difficult but we’ve got 24 solutions for hard-to-store stuff.
Hollow Door Fixer
If you have a sizable hole in a painted hollow-core door, here’s a quick way to fix it: Completely fill the hole with spray foam insulation (a can costs about $4 at home centers) so the foam is about level with the door surface. Allow it to dry overnight. The foam will expand slightly as it dries, forming a slight mound. Slice off the mound with a razor knife so the foam is slightly lower than the door surface. Apply one or two coats of drywall compound, sand it smooth when dry, and paint. — Richard Loeb Jr.That spray foam fix is great but it’s not as brilliant as these 15 uses for spray foam you never knew.
Roof Gutter Tool Trays
Here’s my solution to workbench clutter: I mounted vinyl gutters along both ends of my workbench to hold small tools and other items that usually end up buried on the work surface. The gutters are durable, inexpensive, and it’s easy to find things in them. An added benefit is that small items that get knocked off the workbench no longer fall on the floor. Use an end cap at each end. — Scott Wright. Gutters aren’t only great for a workbench, see how they’re great in a kitchen too.
Do those plastic downspout splashblocks tend to wander away from the foundation of your house, allowing water to seep into the basement? To prevent this, drill two holes through the hefty corners of the plastic at the back end. To anchor it, drive two large spikes through the holes into the ground. — Joseph PerroneIf you’ve got gutter issues of any kind, be sure to check out these 25 hints for fixing gutter problems.
Plastic Bag Storage
If those empty plastic grocery bags are threatening to take over your kitchen, here’s help: Stuff them into an empty paper towel tube. It’s quick and easy, and a dozen or so bags take up hardly any space. Keep the stuffed tube handy in a drawer. — Joan HillPaper towel tubes are great for storing items. We’ve got 10 more incredible ways to reuse paper towel tubes for storing things.
Blade Life Extender
When the blade in your utility knife gets dull, it’s usually only the point and the first 1/4 in. or so that’s bad. You can get additional life from your blade by snapping off the point with a pliers (wear safety glasses). It won’t cut quite as well as a fresh blade, but a lot better than the dull one. — Dennis FeldpauschCheck out some brilliant uses for razor blades that you can use around the house.